My Blog

Posts for: June, 2017

OrthodontistscanUseOtherToolswithBracesforComplexBiteProblems

Braces utilize the mouth’s existing teeth-moving mechanism by applying pressure in the direction of the desired movement. This is done with a wire laced through metal brackets affixed to the outside of the teeth that’s then usually anchored to brackets on the back teeth to maintain constant tension.

This anchorage set-up alone, however, may not work effectively with all bite situations, which might require other points of anchorage. That’s where these other tools in the orthodontist’s toolkit can come in handy.

Headgear. These appliances not only aid with moving teeth but they also help influence the proper growth of facial structures (as when one of the jaws is too far forward or too far back). Because of this influence on jaw growth you’ll only find them used with pre-teens. The most typical application is a strap running around the back of the head or neck (or sometimes over the chin or forehead) that attaches in the front to brackets usually bonded to the molars. In this case the back of the patient’s skull serves as the anchor point.

Temporary anchorage devices (TADs). Orthodontists sometimes wish to isolate the teeth to be moved from nearby teeth that shouldn’t be. For example, they may want to move front teeth back to close a space without the back teeth moving forward. In this case, it may be necessary to create a separate anchorage point in the jaw. This can be done with TADs, which are made of either biotolerant (stainless steel, chromiumâ??cobalt alloy), bioinert (titanium, carbon), or bioactive (hydroxyapatite, ceramic oxidized aluminum) materials and shaped like mini-screws. Orthodontists insert them into the bone and then attach them to the braces using elastics (rubber bands). After completing orthodontic treatment they’re easily removed.

Elastics. We’ve already mentioned them, but elastics deserve their own category because they can be used in various kinds of anchorage. They play an important role, for example, in cross-arch anchorage that maintains tension between the upper and lower jaws. They can also be used to help move one or more groups of teeth — or isolate certain teeth from moving. They truly are flexible (no pun intended) in their uses for fine-tuned tooth movement.

All these devices can be used in various combinations to match and correct whatever bite situation a patient may have. The end result is straighter and better-functioning teeth — and a more attractive smile.

If you would like more information on orthodontic treatment, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”


By David Mayer, DDS
June 11, 2017
Category: Dental Procedures
NewFrontTeethforaTeenagedDavidDuchovny

In real life he was a hard-charging basketball player through high school and college. In TV and the movies, he has gone head-to-head with serial killers, assorted bad guys… even mysterious paranormal forces. So would you believe that David Duchovny, who played Agent Fox Mulder in The X-Files and starred in countless other large and small-screen productions, lost his front teeth… in an elevator accident?

“I was running for the elevator at my high school when the door shut on my arm,” he explained. “The next thing I knew, I was waking up in the hospital. I had fainted, fallen on my face, and knocked out my two front teeth.” Looking at Duchovny now, you’d never know his front teeth weren’t natural. But that’s not “movie magic” — it’s the art and science of modern dentistry.

How do dentists go about replacing lost teeth with natural-looking prosthetics? Today, there are two widely used tooth replacement procedures: dental implants and bridgework. When a natural tooth can’t be saved — due to advanced decay, periodontal disease, or an accident like Duchovny’s — these methods offer good looking, fully functional replacements. So what’s the difference between the two? Essentially, it’s a matter of how the replacement teeth are supported.

With state-of-the-art dental implants, support for the replacement tooth (or teeth) comes from small titanium inserts, which are implanted directly into the bone of the jaw. In time these become fused with the bone itself, providing a solid anchorage. What’s more, they actually help prevent the bone loss that naturally occurs after tooth loss. The crowns — lifelike replacements for the visible part of the tooth — are securely attached to the implants via special connectors called abutments.

In traditional bridgework, the existing natural teeth on either side of a gap are used to support the replacement crowns that “bridge” the gap. Here’s how it works: A one-piece unit is custom-fabricated, consisting of prosthetic crowns to replace missing teeth, plus caps to cover the adjacent (abutment) teeth on each side. Those abutment teeth must be shaped so the caps can fit over them; this is done by carefully removing some of the outer tooth material. Then the whole bridge unit is securely cemented in place.

While both systems have been used successfully for decades, bridgework is now being gradually supplanted by implants. That’s because dental implants don’t have any negative impact on nearby healthy teeth, while bridgework requires that abutment teeth be shaped for crowns, and puts additional stresses on them. Dental implants also generally last far longer than bridges — the rest of your life, if given proper care. However, they are initially more expensive (though they may prove more economical in the long run), and not everyone is a candidate for the minor surgery they require.

Which method is best for you? Don’t try using paranormal powers to find out: Come in and talk to us. If you would like more information about tooth replacement, please contact us or schedule an appointment for a consultation. You can learn more in the Dear Doctor magazine articles “Crowns & Bridgework,” and “Dental Implants.”